Tel: 0086-512-5782-6156 | Mob: 0086-147-6145-1886|Email: sales@wireproauto.com

TS-R02 pelacables twister crimpadora automática de virolas

Model: TS-R02

It can finish wire stripping, copper twisting and automatic ferrules crimping one time. Very good for multi-cores cable.

Descripción

Automatic bootlace crimper

This wire stripping twisting and ferrule crimping machine, It is suitable for crimping a variety of loose tubular terminals onto cables, twisting function to prevent loose conductors when crimping, and Not need to change crimping dies for different size terminals.
Stripping, piercing terminals, and crimping terminals are completed in 2.5 seconds, greatly improving efficiency; Applied for the tubular terminal from 0.3mm² to 4mm².

1. One machine suitable for crimping a variety of loose tubular terminals onto cables, Not need to change crimping dies for different size tubes.
2. Wire stripping twisting and crimping can be finished at one time. For Stranded Wire or very thin wires, this function can prevent the copper wire from standing upside down when entering the terminal.
3. LCD display, automatically adjusts stripping depth and length, very easy to operate.
4. Mute motor feeding, automatic supply terminal, terminal four-side crimping, no need to change crimping die, saving time and effort.
5. Easy replacement of reclaimer, only need to unscrew the screw (red circled part), you can replace the reclaiming clamp
6. Ferrule feeder, When the terminal is large, increase the vibration amplitude of the guide rail; when the terminal is small, decrease the vibration amplitude of the guide

Características

Wire stripping machine and ring terminal crimping machine video:

Datos técnicos

Modelo
TS-R02
Function
Wire stripping twisting and ring terminal crimping
Available Wire
BVR wire 0.5,0.75,1.0,1.5,2.5,4.0mm2
Available Terminal
Insulator length ≤7.5mm, conductor length≤10mm
Stripping Length
Max.12mm (the wire need more than 35mm into the machine)
Production Rate
2.5s /wire
Air supply
0.6-0.8Mpa
Power
AC220V/110V
Dimensiones
50KG
Peso
39*42*50cm

 

Aplicación

Wire stripping and ring terminal crimping

 

Descargar

Si desea disponer de la ficha técnica de este u otros productos, puede comunicárnoslo aquí: CONTACTO

O por correo electrónico a [email protected]le enviaremos la presentación de la máquina.

Obtenga detalles y precios ahora

Si desea consultar sólo este producto, por favor envíe un mensaje aquí. Si desea solicitar varios productos, por favor Añadir al presupuestocitar todos los productos de la Página de solicitud de presupuesto.

WIREPRO le enviará presupuestos lo antes posible : )

    Ir arriba