Model: PB-020
Shielding wires brushing and twisting machine, it can brush the shielding net to one side and twist the wire.
PB-020 shielding wires net brushing and twisting machine
Descripción
Shielding wires brushing and twisting machine, it can brush the shielding net to one side and twist the wire.
All kinds of ground wires, braided wires and isolation wires can be tightened, completely replacing manual work.
Features:
1. Easy to operate, when the air source is connected, the gripping hand will automatically open. When working, only need to hold the wire in, and lightly turn on the footswitch to complete the twisting operation.
2. There is no need to adjust the elastic clamping wire when the wire diameter is different.
3.The automatic gripper adopts an exposed design so that the scattered copper wires are also easily placed.
4. The opening size of the chuck can be adjusted. Loosen the chuck spindle screw inside the machine, move the entire chuck to the motor direction and then tighten the spindle screw to expand it, and vice versa.
5. The clamping force of the chuck can be increased to 5 to 6 springs by the spring force.
Datos técnicos
| Modelo | PB-020 |
| Brushing wire range | 0.1-10 mm |
| Wire range | 0.1-2 mm2 |
| Brushing length | 1 – 60mm(up to 80-100mm depending on net material) |
| Twisting length | 5—80mm (150mm customizable ) |
| Twisting speed | 1400 circle/s |
| Brushing motor | 3000 circle/s |
| Power supply | AC220V 50Hz |
| Power | 10W |
| Dimension | 340*190*170mm |
| Peso | 12kgs |
Aplicación
Descargar
Si desea disponer de la ficha técnica de este u otros productos, puede comunicárnoslo aquí: CONTACTO
O por correo electrónico a [email protected]le enviaremos la presentación de la máquina.
Obtenga detalles y precios ahora
Si desea consultar sólo este producto, por favor envíe un mensaje aquí. Si desea solicitar varios productos, por favor Añadir al presupuestocitar todos los productos de la Página de solicitud de presupuesto.
WIREPRO le enviará presupuestos lo antes posible : ）
