Tel: 0086-512-5782-6156 | Mob: 0086-147-6145-1886|Email: sales@wireproauto.com

SP-3010 SP-3025 Pelacables neumático semiautomático por inducción

Model: SP-3010

SP-3010  no need to change the blade for different diameter wires, very good for multi-cores cables with different diameter inner cores.

Descripción

This machine is suitable for stripping all kinds of electronic wires, power cord sheathed wires, and sheathed core wires of different wire diameters.
1. It is designed with pure pneumatic induction, without power supply, and the thick and thin wire tools are free of replacement and adjustment;
2. The cutter tool adopts four pieces blade with 90 degrees vertical cross method, and the stripping is clean and tidy, which avoids vulnerable core wire, and conductor bending caused by two cross cutters.
3. The cutting depth only needs to be fine-tuned, to support the peeling length, full peeling, and half peeling.
4. The structure of the machine is compact and reasonable, the operation is simple, and the safety is excellent.

Datos técnicos

Modelo SP-3010 SP-3025
Características Don’t change the knife for different wires, induction start.
Conductor Cross-Section 0.5-6mm² ( max 10 mm² ) 0.5-25mm² 
Stripping Length 2-50mm 3-60mm
Air Connection  0.5MPa – 0.7MPa 0.5MPa – 0.7MPa
Production Rate 1500 – 2000 pcs/h 1500 – 2000 pcs/h
Peso 25kg 30kg
Dimensiones 40*37*20cm 48*38*20cm

Aplicación

For small and big wire stripping

Descargar

Si desea disponer de la ficha técnica de este u otros productos, puede comunicárnoslo aquí: CONTACTO

O por correo electrónico a [email protected]le enviaremos la presentación de la máquina.

Obtenga detalles y precios ahora

Si desea consultar sólo este producto, por favor envíe un mensaje aquí. Si desea solicitar varios productos, por favor Añadir al presupuestocitar todos los productos de la Página de solicitud de presupuesto.

WIREPRO le enviará presupuestos lo antes posible : )

    Ir arriba