Model: TP-M10
Just need to change the crimping dies for different terminals. If there are a lot of different kinds of terminals to be crimped, this crimper is the best choice.
TP-M10 Multiple terminals pneumatic small wire terminal crimper
Descripción
1. The machine is driven by a dual-action normal cylinder, which has advantages of high efficiency and quality in crimping force and speed.
2. The machine is fit for many kinds of terminals. Just need to change the crimping dies for different terminals. If there are a lot of different kinds of terminals to be crimped, this crimper is the best choice.
3. The operation is simple: crimping machine and the gas source connection; match the supply air terminal and wire-bound good; according to the required length of crimp terminals to adjust the depth of the interface pressure; foot control the crimping.
4. Made of high-quality components and materials, durable
Accessories: one die set, one-foot air valve, two air pipes.
Terminal crimper video:
Datos técnicos
| Modelo | TP-M10 |
| Crimping force | 1.35 Ton |
| Aplicación | Pneumatic crimping tools |
| Crimping dies | non-insulated terminals: ≤16mm² ;
Insulated Terminal: ≤6mm² ; tubuler terminal: ≤35mm². |
| Air Pressure | 0.7-0.95 Mpa |
| Dimension | 26X12X14 cm |
| Peso | 13kgs |
Aplicación
Wire stripping and ring terminal crimping
Descargar
Si desea disponer de la ficha técnica de este u otros productos, puede comunicárnoslo aquí: CONTACTO
O por correo electrónico a [email protected]le enviaremos la presentación de la máquina.
Obtenga detalles y precios ahora
Si desea consultar sólo este producto, por favor envíe un mensaje aquí. Si desea solicitar varios productos, por favor Añadir al presupuestocitar todos los productos de la Página de solicitud de presupuesto.
WIREPRO le enviará presupuestos lo antes posible : ）
