Model: TA-DW2
This series machine is a fully automatic two-ends wire cutting stripping & wire seal automatic feeding and loading machine & terminal crimping machine.
TA-DW2 full automatic two end superseal wire seal insertion and terminal crimping machine
Descripción
1. The machine will first load the wire seal and then strip the rubber jacket, which avoids the bad press and fillet phenomenon on the wire copper wire
2. The two ends of the wire can be cut, stripped, wire seals automatic feeding and insertion, and crimp terminal
3. The pressure induction system for crimping can be installed
3. The parameters such as wire cutting length, stripping length, and glue depth are all controlled by a touch screen, which is easy to learn and understand and can be operated skillfully after simple learning.
4. Applicators can be used and can be quickly exchanged.
5. Conveyor belt table length can be customized.
| Modelo | TA-DS05 |
| Wire range | AWG#18-#28 |
| Cut length | 40-1500mm （can custom） |
| Cutting tolerance | ±0.5mm + L*0.2% |
| Stripping length | R<10mm; L<15mm |
| Crimping strength | 2T ultra-silence |
| Productivity | 2200pcs / hour ( based on wire length 150mm) |
| Power supply | AC220V 50HZ single phrase |
| Power | 3.5KW |
| Air compression | 0.5MPA (5kgf/cm) |
| Control | MSP430E micro-controller, 165NA/MIPS woking mode |
| Dimensiones | 103*84*200mm |
| Peso | 380kg |
Aplicación
The series machines are designed for stripping big-size cable.
Descargar
Si desea disponer de la ficha técnica de este u otros productos, puede comunicárnoslo aquí: CONTACTO
O por correo electrónico a [email protected]le enviaremos la presentación de la máquina.
Obtenga detalles y precios ahora
Si desea consultar sólo este producto, por favor envíe un mensaje aquí. Si desea solicitar varios productos, por favor Añadir al presupuestocitar todos los productos de la Página de solicitud de presupuesto.
WIREPRO le enviará presupuestos lo antes posible : ）
